SDFCl3000 Fluorine & Chlorine Analyzer

Application:

SDFCl3000 fluorine and chlorine analyzer can be used to determine the fluorine and chlorine content in coal and other combustible materials.

Product description

Highlights

①Sample introduction,analysis,calculation and calibration can be completed automatically.

②Fluorine and chlorine test results can be obtained in single sample testing.

③Configured condenser,no need water supply.

④Sophisticated liquid collecting and sampling method,avoid the dead volume have influenced the test results.

⑤With liquid condensation and temperature control technology,guarantee a uniform temperature during liquid collecting,decrease the impact of temperature difference on test results.

Specification：

Description	SDFCl3000
Test range	Fluorine: 50ppm〜20%
Test range	Chlorine: 80ppm〜40%
Test time	Including calibration of electrode parameters, sample decomposition and collection, titration and clearning.
Calibration of electrode	Available to calibrate when decomposing the parameters first batch of samples and not calculated to total analysis time. Not necessary to calibrate each day, calibration be proceeded after long-time test. If electrode is not used for long time, calibration is also needed.
Decomposition	30min approximately
Titration	5min approximately for fluorine；5min approximately for chlorine
Sample weight	0.5g
Temperature control precision	1100±5℃
Max power	4kW
Uncertainty	Within uncertain region of standard sample
Standards	Fluorine:ISO 11724, ASTM D5987,GB/T 4633, AS 1038.10.4 Chlorine: ISO 587, ASTM D6721,GB/T 3558, SN/T 3596